Introduction

The idea behind this project is to create a light or solar responsive panels which can orient the panels in order to receive maximum output from the surfaces. So, the major parameter this prototype will be functioning on the movement on the light or sun.

 

 

BOM (Bill of Materials)

  1. Arduino Uno Rev3
  2. Breadboard Jumper Wire
  3. USB 2.0 Cable Type A/B
  4. Breadboard
  5. Resistor
  6. Servo
  7. LDR Sensor0

SCHEMATIC

PROTOTYPE

 

Light tracking panel is a project of IAAC, Institute for Advanced Architecture of Catalonia developed at Master in Advanced Architecture (MAA01) 2021/22 by Student: Harshul Goti and faculty: Cristian Rizzuti, faculty assistant: Arman Najari.